Fiber vs. CO2 vs. UV: Which laser marker should I choose?

Lasers can mark and process a wide variety of products, but there's no one-size-fits-all answer for every application. Fiber, CO2 and UV laser markers perform differently depending on the application and material.

Here's a brief overview of Fiber, CO2 and UV laser technology. We've also included some sample marking videos that highlight the strengths and weaknesses of each system.

The most important difference between Fiber, CO2 and UV laser markers is the wavelength of light they produce.

Short wavelengths typically have more energy and a higher absorption rate than long wavelengths. As a result, a laser's wavelength affects its ability to mark certain materials.

The features of and marking examples for the different wavelength types are introduced below.

                         A Ultraviolet range     B Visible range   C Infrared range

 Fiber lasers have a 1090 nm wavelength, making them IR (infrared) lasers. Fiber lasers can mark a wide range of materials, though they are optimized for metal marking applications. Their high power makes them perfect for annealing and engraving applications, but they cannot mark transparent objects since IR light passes straight through.

Applications

                             A Ultraviolet range     B Visible range   C Infrared range

CO2 lasers have 10x the wavelength of standard wavelength systems. They're great at marking paper, resins, wood, rubber and transparent materials (like

glass and PET). However, it's nearly impossible to mark metal with a CO2 laser marker because the laser light is not absorbed.

Applications

                                A Ultraviolet range    B Visible range     C Infrared range
UV lasers use a highly absorbable wavelength (355 nm) to mark parts. This high absorption rate allows UV lasers to perform "cold marking" (i.e. marking without extra heat stress). As a result, UV lasers are ideal for applications that require high-contrast or minimal product damage.
Applications
                              A Ultraviolet range    B Visible range      C Infrared range
Results:
Fiber Laser: Highly visible marking is possible.
CO2 Laser: Marking isn't possible because iron doesn't absorb CO2 laser light.
UV Laser: Damage-free marking is possible but the contrast is low (compared to the fiber laser mark).
Results:
Fiber Laser: Marking may not be possible because copper is highly reflective and doesn't easily absorb Fiber laser light.
CO2 Laser: Marking isn't possible because copper doesn't absorb CO2 laser light.
UV Laser: High-contrast, damage-free marking is possible because copper easily absorbs UV laser light.
Results:
Fiber Laser: Fiber laser light reacts with the pigments in the resin to produce high-contrast marks.
CO2 Laser: 
CO2 laser light creates non-contrast marks and causes the resin's surface to swell.
UV Laser: 
UV laser light reacts with the pigments in the resin to produce high-contrast, damage-free marks.
Results:
Fiber Laser: Marking isn't possible because the carton doesn't absorb Fiber laser light.
CO2 Laser: CO2 laser light burns the surface of the carton to produce marks.
UV Laser: The paper on the carton absorbs UV laser light, resulting in high-contrast marks.

Results:
Fiber Laser: Marking isn't possible because clear plastic doesn't absorb Fiber laser light.
CO2 Laser: 
CO2 light uses heat to produce marks.
UV Laser: 
Marking isn't possible because clear plastic doesn't absorb enough UV laser light.
Results: 
Fiber Laser: Fiber laser light is not easily absorbed and damages the pouch.
CO2 Laser: 
CO2 laser light creates marks by burning off the pouch's surface.
UV Laser: 
UV laser light reacts with the film on top of the pouch to produce high-contrast, damage-free marks.

Fiber lasers can quickly mark the widest range of materials and typically produce the most contrast on metals. However, fiber lasers cannot mark transparent materials and will sometimes damage the marking surface.

UV lasers provide the most contrast on resins. UV lasers have the added benefit of creating damage-free marks.

CO2 lasers burn the target with heat, making them ideal for marking wood, paper, ceramic and transparent targets.

Retour au blog